Metapace T-40 - 2 Specification; 2.1 Technical specification; 2.2 Cutter parameters; 2.3 Paper specification

T-40 User’s Manual
2
2 Specification
2.1 Technical specification
Item
Parameter
Printing
Print method
Direct thermal line printing
Resolution
203 × 203 DPI; 203 × 180 DPI
Paper width
57.5/80/82.5 mm
Print width
Max.80 mm
Print speed
Max.250 mm/s
Flash LOGO
Max. 1M bytes
Command buffer area
64K bytes, 4K bytes or 45 bytes
Interface
USB
USB 2.0 (full speed)
Serial interface
RS-232C
Parallel interface
IEEE1284
Ethernet interface
10/100BASE-T
Cash drawer
Can select to controlling 1～2 cash drawers
Memory
RAM: 2 MB, Flash: 4 MB
Printer status detection
Paper end sensor/ black mark sensor;
Paper near end sensor;
Cover position sensor;
Paper presence sensor
Print head temperature sensor;
Printer voltage detection
Cut mode
Full cut, partial cut
Barcode
1D
UPC-A, UPC-E, CODE 39, CODE 93, CODE 128, EAN8, EAN13,
ITF, CODABAR
2D
PDF417, QR, Maxicode
Fonts
Font A: 12 × 24
Font B: 9 × 17
Kanji font A: 24 × 24
Character set
95 Alphanumeric
14 types of international characters
128 x 68 code page
Optional: Traditional Chinese, Simplified Chinese
(GB2312/18030), Japanese, Korean, English, HK
User-defined font (95) & code page
Character enlargement
All characters can be enlarged 1-6 times horizontally and vertically
Character rotation
Rotation printing in four directions (0°, 90°, 180°, 270°)
Command
ESC/POS compatible
Paper
Paper type
Thermal continuous paper
Thermal marked paper
Paper roll OD
Max. 83 mm