Metcom Solutions COM200 Series User Manual

4 Functionality Page 15 of 25
COM200 module - Product Manual 1.0 MetCom Solutions GmbH
4.3.4.3 Push method using TCP
With the TCP Push method predefined data can be send to a predefined Server using a TCP
connection. Parameters for the TCP push are
• Server
• Port number
4.3.4.4 Push method using SMS
With the SMS Push method predefined data can be send to a predefined phone number using
the SMS service. Parameters for the SMS push are
• phone number
4.3.4.5 Push method using Email service
With the Email Push method predefined data can be send to a predefined Email address using
the Email service. Parameters for the Email push are
• Server
• Port number
• Email address of transmitter
• Email address of receiver
• Reference
• User name and password
• Usage of SSL (yes/no)
4.4 NTP synchronization
With the COM200 the time & date of the meter can be synchronized by an external NTP server.
The synchronization take place:
- After power up of the meter
- At a configurable time, after the communication module is restarted
Node sayaç Çözümleri Ltd. Şti.
Metering Solutions
www.node.com.tr

Metcom Solutions COM200 Series Specifications

General

Brand	Metcom Solutions
Model	COM200 Series
Category	Control Unit
Language	English

Summary

Overview

Referenced Documents

Lists documents referenced in the manual.

Definitions and Abbreviations

Explains technical terms and abbreviations used in the manual.

Safety and Maintenance Information

Responsibilities and Safety Instructions

Outlines user responsibilities and critical safety regulations for module handling.

Maintenance and Disposal

Details module maintenance procedures, cleaning, and proper end-of-life disposal.

Mechanical Design

Module Concept and Integration

Explains the module's integration with the meter and its key features.

Module Housing Variants

Describes the physical housing of the communication module and its variants.

Functionality

Data Exchange Support

Details supported data exchange methods like GPRS, CSD/SMS, and DLMS protocol.

Communication Protocols

Lists the communication protocols supported by the module, like DLMS/COSEM and EN62056-21.

Push Functionality

Explains the "Push" mode, its triggering, data formats, and transmission methods.

NTP Synchronization

How the module synchronizes time and date using NTP servers.

HW Variants

Antenna Connection Options

Details the internal and external antenna connection options.

Frequency Band Support

Information on supported frequency bands for the module (Dual/Quad Band).

RS485 Interface Support

Describes the availability and use of an RS485 interface for connecting other meters.

Installation

Module Installation Procedure

Step-by-step guide for physically installing the communication module.

Signal Strength and Provider Check

How to check GSM/GPRS signal strength and network provider on the meter LCD.

Firmware Upgrade

Firmware Image Transfer

Procedure for transferring firmware image files to the module using the Blue²Link tool.

Firmware Activation

Steps to activate the transferred firmware on the module immediately or later.

Module Configuration Tool

Module Settings Configuration

Configuration options for SIM, APN, username, password, and socket definitions.

Module Status Readings

How to read module status like operator, cell info, signal quality, and IMEI.

Push Setup Settings

Settings for configuring push targets, lists, and triggers for data transmission.

Type Key

Technical Data