EasyManuals Logo

Metcom Solutions COM200 Series User Manual

Metcom Solutions COM200 Series
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
2 Safety and maintenance information Page 8 of 25
COM200 module - Product Manual 1.0 MetCom Solutions GmbH
2.3 Maintenance
No maintenance is required during the communication module life-time. The implemented
communication technique, built-in components and manufacturing procedures ensure high long-
term stability.
In case the service of the module is needed, the requirements from the module installation
procedure must be observed and followed.
Cleaning of the module is allowed only with a soft dry cloth. Cleaning is forbidden in the
region of terminal cover, where cables are connected to the meter. Cleaning can be
performed only by the personnel responsible for maintenance.
CAUTION: Never clean soiled modules under running water or with high pressure
devices. Penetrating water can cause short circuits. A damp cleaning cloth is enough to
remove normal dirt such as dust.
The quality of seals must be regularly checked.
DANGER: Breaking the seals and removing the terminal cover or meter cover will lead to
potential hazards because there are live electrical parts inside.
After the end of the meter’s lifetime, the communication module should be treated
according to the Waste Electric and Electronic (WEEE) Directive!
2.4 Disposal
The components used in the COM200 series modules are largely recyclable according to the
requirements of the environmental management standard ISO14001. Specialized disposal and
recycling companies are responsible for material separation, disposal and recycling. The
following table identifies the components and their treatment at the end of the life cycle.
Components Waste collection and disposal
Circuit boards
Electronic waste disposal according to local regulations
LED’s
Special waste: Dispose of according to local regulations.
Metal parts
Recyclable material: Collect separately in metal containers.
Plastic parts
To be recycle separately. If necessary, Of waste incineration.
Batteries
Prior to disposal of unused or used Li-Batteries, safety precautions must
be taken against short circuits. Batteries can leak or ignite.
Do not dispose of used or defective lithium batteries in the household
waste but observe the local waste and environmental regulations.
Node sayaç Çözümleri Ltd. Şti.
Metering Solutions
www.node.com.tr

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Metcom Solutions COM200 Series and is the answer not in the manual?

Metcom Solutions COM200 Series Specifications

General IconGeneral
BrandMetcom Solutions
ModelCOM200 Series
CategoryControl Unit
LanguageEnglish

Related product manuals