Metos LUX2 60EL DDE - User Manual

Questions and Answers

K
Kayla RubioAug 5, 2025
Why my Metos Dishwasher does not load water?
- J
  Jeffrey HenryAug 6, 2025
  If your Metos Dishwasher isn't loading water, first, check if the water valve is shut and open it. Additionally, the rinse nozzles or solenoid-valve filter might be blocked or scaled with limestone; clean the rinse arm nozzles, piping, and solenoid-valve filter. If your machine has a water softener, verify the salt content or regenerate the resins more often. Finally, a defective pressure-switch could be the issue, requiring a replacement.
J
Jeffrey FarrellAug 14, 2025
Why does my Metos LUX2 60EL DDE Dishwasher load water very slowly?
- D
  Daniel MolinaAug 14, 2025
  If your Metos Dishwasher loads water very slowly, the water supply pressure might be scarce. Check the water supply pressure.
K
Kristin PayneAug 21, 2025
Why are the washing results unsatisfactory in my Metos LUX2 60EL DDE Dishwasher?
- J
  Jonathan OrtizAug 21, 2025
  Unsatisfactory washing results in your Metos Dishwasher can occur for several reasons. The washing nozzles might be obstructed, or the rack may not be rotating; remove the wash rack and clean the wash nozzles, ensuring the wash-arm is correctly positioned and firmly tightened. Foam presence indicates the need for no-foam detergents or a reduced detergent dose. Insufficient detergent concentration can cause fats or starches not to be removed. Dirty filters also contribute; remove them, clean with a brush under running water, and replace them. If possible, select a longer wash-cycle, or repeat the wash cycle. Also, if the wash water is dirty, drain the tank water, clean the filters, refill the tank, and correctly replace the filters.
L
Lisa NguyenAug 28, 2025
What to do if objects are not properly dried in Metos LUX2 60EL DDE Dishwasher?
- D
  Dr. Alicia KingAug 28, 2025
  If objects are not properly dried in your Metos Dishwasher, it could be due to several reasons. Ensure there is enough rinse aid by increasing the dosage. The rack might not be suitable for the objects; use a suitable rack that gives the objects an inclined position, allowing water to rinse away. Also, as soon as the cycle stops, remove the rack with objects so that they can dry more quickly in the air. Check the boiler temperature as the rinse water temperature may be too low. If the surface of dishes and glasses are too rough or porous, replace the type of dishes and glasses used.

Summary

General Safety Warnings

Machine Description and Features

Overview of Components

Details the main parts of the dishwasher, including the control panel and door.

Machine Features and Noise Level

Specifies the machine's noise level and other key features.

Data Plate Information

Explains the data plate details such as model, serial number, and electrical ratings.

Control Panel and Symbols

Control Panel Keys

Identifies and explains the function of each control panel key.

Display Indicators

Details the meaning of various symbols and indicators shown on the display.

Operation Procedures

Initial Machine Start-up

Step-by-step guide for powering on the dishwasher and preparing it for operation.

Starting a Wash Cycle

Instructions on how to select and initiate a wash program, including available cycle options.

Switching Off and Draining

Procedures for safely shutting down the machine and draining the water tank.

Loading Cutlery and Crockery

Guidelines for correctly placing dishes and cutlery in racks for optimal washing.

Detergent Usage Guidelines

Recommendations for selecting and using appropriate detergents for effective cleaning.

Rinse Aid Application

Information on the proper use of rinse aid for improved drying and spot prevention.

Drain Pump System (Optional)

Details on the operation and use of the optional drain pump for emptying the tank.

Regeneration Function (Optional)

Explanation of the water softener regeneration process and salt addition.

Extra Cold Rinse Function (Optional)

How to use the optional cold rinse feature for enhanced hygiene.

Inlet Water Temperature Probe (Optional)

Instructions for checking inlet water temperature using the optional probe.

Ecological Considerations

Optimizing Resource Usage

Advice on conserving energy, water, and detergent for environmental benefit.

HACCP and Hygiene Regulations

Maintenance

Routine Daily Maintenance

Essential daily cleaning and checks to ensure proper machine function.

Extraordinary Maintenance Checks

Periodic checks and servicing by qualified personnel for long-term reliability.

Machine Installation

Handling and Storage

Guidelines for safe lifting, moving, and storing the dishwasher before installation.

Installation Site Requirements

Specifies necessary room conditions and temperature ranges for proper installation.

Electrical Connection Requirements

Details on electrical hook-up, including safety switches and ground connections.

Water and Steam Installation

Water Supply Connection Details

Technical specifications for connecting the water supply, including pressure and hardness.

Water Supply Quality Parameters

Defines acceptable parameters for water quality, such as chlorine, pH, and iron content.

Steam Evacuation Requirements

Ventilation requirements for the installation room to manage steam and humidity.

Final Installation Steps

Machine Positioning and Levelling

Instructions for placing the machine correctly and ensuring it is level for stable operation.

Electrical Connection Procedures

Further details on connecting the power supply, including cable type and phase checks.

Water Connection Procedures

Guidance on connecting the water inlet and drain hoses, including drain height.

Post-Installation Start-up

Initial steps to take after installation before the machine is fully operational.

Signals and Alarms

Understanding Machine Signals

Explanation of visual and textual signals indicating machine status or warnings.

Machine Alarms and Causes

Lists various alarm codes, their causes, and initial troubleshooting steps.

Environmental Aspects

Packaging and Disposal Information

Details on product packaging materials and proper disposal methods according to regulations.

Troubleshooting Guide

EU Declaration of Conformity

Summary

General Safety Warnings

Machine Description and Features

Overview of Components

Details the main parts of the dishwasher, including the control panel and door.

Machine Features and Noise Level

Specifies the machine's noise level and other key features.

Data Plate Information

Explains the data plate details such as model, serial number, and electrical ratings.

Control Panel and Symbols

Control Panel Keys

Identifies and explains the function of each control panel key.

Display Indicators

Details the meaning of various symbols and indicators shown on the display.

Operation Procedures

Initial Machine Start-up

Step-by-step guide for powering on the dishwasher and preparing it for operation.

Starting a Wash Cycle

Instructions on how to select and initiate a wash program, including available cycle options.

Switching Off and Draining

Procedures for safely shutting down the machine and draining the water tank.

Loading Cutlery and Crockery

Guidelines for correctly placing dishes and cutlery in racks for optimal washing.

Detergent Usage Guidelines

Recommendations for selecting and using appropriate detergents for effective cleaning.

Rinse Aid Application

Information on the proper use of rinse aid for improved drying and spot prevention.

Drain Pump System (Optional)

Details on the operation and use of the optional drain pump for emptying the tank.

Regeneration Function (Optional)

Explanation of the water softener regeneration process and salt addition.

Extra Cold Rinse Function (Optional)

How to use the optional cold rinse feature for enhanced hygiene.

Inlet Water Temperature Probe (Optional)

Instructions for checking inlet water temperature using the optional probe.

Ecological Considerations

Optimizing Resource Usage

Advice on conserving energy, water, and detergent for environmental benefit.

HACCP and Hygiene Regulations

Maintenance

Routine Daily Maintenance

Essential daily cleaning and checks to ensure proper machine function.

Extraordinary Maintenance Checks

Periodic checks and servicing by qualified personnel for long-term reliability.

Machine Installation

Handling and Storage

Guidelines for safe lifting, moving, and storing the dishwasher before installation.

Installation Site Requirements

Specifies necessary room conditions and temperature ranges for proper installation.

Electrical Connection Requirements

Details on electrical hook-up, including safety switches and ground connections.

Water and Steam Installation

Water Supply Connection Details

Technical specifications for connecting the water supply, including pressure and hardness.

Water Supply Quality Parameters

Defines acceptable parameters for water quality, such as chlorine, pH, and iron content.

Steam Evacuation Requirements

Ventilation requirements for the installation room to manage steam and humidity.

Final Installation Steps

Machine Positioning and Levelling

Instructions for placing the machine correctly and ensuring it is level for stable operation.

Electrical Connection Procedures

Further details on connecting the power supply, including cable type and phase checks.

Water Connection Procedures

Guidance on connecting the water inlet and drain hoses, including drain height.

Post-Installation Start-up

Initial steps to take after installation before the machine is fully operational.

Signals and Alarms

Understanding Machine Signals

Explanation of visual and textual signals indicating machine status or warnings.

Machine Alarms and Causes

Lists various alarm codes, their causes, and initial troubleshooting steps.

Environmental Aspects

Packaging and Disposal Information

Details on product packaging materials and proper disposal methods according to regulations.

Troubleshooting Guide

EU Declaration of Conformity

Metos LUX2 60EL DDE Specifications

General

Brand	Metos
Model	LUX2 60EL DDE
Category	Dishwasher
Language	English

Related product manuals

Metos LUX 60 EL

24 pages

Metos Master LUX 60-EL

33 pages

Metos Master LUX 40 EL

29 pages

Metos Master HOOD 130 LUX II

Metos optiflow WD-153

72 pages

Metos LUX2 60EL DDE - User Manual

Table of Contents

Questions and Answers

Summary

General Safety Warnings

Machine Description and Features

Overview of Components

Machine Features and Noise Level

Data Plate Information

Control Panel and Symbols

Control Panel Keys

Display Indicators

Operation Procedures

Initial Machine Start-up

Starting a Wash Cycle

Switching Off and Draining

Loading Cutlery and Crockery

Detergent Usage Guidelines

Rinse Aid Application

Drain Pump System (Optional)

Regeneration Function (Optional)

Extra Cold Rinse Function (Optional)

Inlet Water Temperature Probe (Optional)

Ecological Considerations

Optimizing Resource Usage

HACCP and Hygiene Regulations

Maintenance

Routine Daily Maintenance

Extraordinary Maintenance Checks

Machine Installation

Handling and Storage

Installation Site Requirements

Electrical Connection Requirements

Water and Steam Installation

Water Supply Connection Details

Water Supply Quality Parameters

Steam Evacuation Requirements

Final Installation Steps

Machine Positioning and Levelling

Electrical Connection Procedures

Water Connection Procedures

Post-Installation Start-up

Signals and Alarms

Understanding Machine Signals

Machine Alarms and Causes

Environmental Aspects

Packaging and Disposal Information

Troubleshooting Guide

EU Declaration of Conformity

Summary

General Safety Warnings

Machine Description and Features

Overview of Components

Machine Features and Noise Level

Data Plate Information

Control Panel and Symbols

Control Panel Keys

Display Indicators

Operation Procedures

Initial Machine Start-up

Starting a Wash Cycle

Switching Off and Draining

Loading Cutlery and Crockery

Detergent Usage Guidelines

Rinse Aid Application

Drain Pump System (Optional)

Regeneration Function (Optional)

Extra Cold Rinse Function (Optional)

Inlet Water Temperature Probe (Optional)

Ecological Considerations

Optimizing Resource Usage

HACCP and Hygiene Regulations

Maintenance

Routine Daily Maintenance

Extraordinary Maintenance Checks

Machine Installation

Handling and Storage

Installation Site Requirements

Electrical Connection Requirements

Water and Steam Installation