Metos WD-4 - User Manual

Other manuals for Metos WD-4

Installation And Operation Manual27 pages

Questions and Answers

J
Jessica LoveAug 12, 2025
What to do if Metos WD-4 Dishwasher does not fill with water?
- Y
  yvonnejonesAug 12, 2025
  If your Metos Dishwasher isn't filling with water, start by checking if the shut-off cock for the incoming water is closed; if so, open it. Ensure the door is fully closed. Verify that the level pipe is correctly in place. Inspect the level pipe's rubber seal to ensure it's sealing against the bottom plate; adjust it if needed, and replace it if damaged. Lastly, check if the rinsing pipes' nozzles are blocked and clean them if necessary.
C
Christy CordovaAug 16, 2025
How to troubleshoot a Metos WD-4 Dishwasher that is not cleaning properly?
- S
  Samantha MarshallAug 16, 2025
  If your Metos Dishwasher isn't cleaning properly, several factors could be at play. Start by checking and cleaning the rinse and wash nozzles, as they might be clogged with dirt. Ensure you're using enough detergent, making sure the hose is submerged and the filter is clean. If the water in the tank is too dirty, change it. Foam in the tank can also be a culprit, so verify that the washing temperature isn't too low and that you're using the correct detergent. For items with dried-on dirt, soak them before washing. Finally, make sure items are correctly positioned in the baskets, using the right type of washing basket and accessories.
T
Thomas ContrerasAug 20, 2025
What to do if Metos WD-4 will not start washing?
- K
  Kaitlyn RyanAug 20, 2025
  If your Metos Dishwasher won't start washing, make sure the door is completely closed. Also, check if any dishes are blocking the magnet on the hood or door; if so, remove them.
K
Kevin OlsonAug 23, 2025
Why washed items won't dry in Metos Dishwasher?
- S
  Samantha GarciaAug 23, 2025
  If washed items are not drying in your Metos Dishwasher, start by checking and cleaning the rinse nozzles, as they may be clogged. Ensure you're using enough rinsing agent, making sure the hose is submerged and the filter is clean. Finally, promptly remove the washed items once the program has ended, instead of leaving them in the machine.
J
johnboydAug 27, 2025
What causes filling to not stop in Metos WD-4 Dishwasher?
- J
  Jessica ColemanAug 27, 2025
  If your Metos Dishwasher is filling non-stop, it might be due to a level pipe issue. Check if the level pipe is properly in place and fit it if it is not. Also, inspect the level pipe's rubber seal to ensure it's sealing against the bottom plate; adjust it if necessary and replace it if damaged.
J
Javier WadeAug 31, 2025
Why Metos Dishwasher stops in the middle of the washing cycle and starts taking in water?
- D
  David SmithAug 31, 2025
  If your Metos Dishwasher stops mid-cycle and starts taking in water, the level pipe's rubber seal might not be sealing correctly against the bottom plate. Adjust the level pipe, check the rubber seal for damage, and replace it if necessary.
G
Gina BarreraSep 4, 2025
How to troubleshoot noise from Metos Dishwasher wash pump?
- C
  craigbeasleySep 4, 2025
  If you're hearing unusual noise from the wash pump of your Metos Dishwasher, it could be due to a low water level or foam in the tank. Check the water level and change the water in the tank.
A
angelpetersonSep 7, 2025
What causes dishes to be upset in the baskets of Metos Dishwasher?
- A
  Ashley SmithSep 7, 2025
  If dishes are being upset in the baskets of your Metos Dishwasher, it's likely due to items being incorrectly positioned. Reposition the items correctly. If you're washing light items, use a net grid to hold utensils in place.

Summary

Installation and User Manual

1. General

1.1 Symbols Used in Manual

Explains symbols used in the manual to convey warnings, safety instructions, and recommendations.

1.2 Symbols on Dishwasher

Details symbols found on the dishwasher and explains machine marking fields on the rating plate.

1.3 Manual and Appliance Agreement

Instructions on checking the appliance's type description against the manual for agreement.

2. Safety Instructions

2.1 General Safety

General safety guidelines, CE marking compliance, and personnel training requirements for safe operation.

2.2 Transport Safety

Guidelines for safe handling and transport of the machine to prevent tipping and damage.

2.3 Installation Safety

Safety measures for electrical cabinet access, ESD sensitivity, and water pipe connections.

2.4 Detergent and Drying Agent

Advises on using appropriate detergents and handling agents safely, including protective gear.

3. Installation

3.1 General

General guidelines for installation by authorised personnel, using diagrams and wiring information.

3.2 Requirements for Installation on Site

Site requirements including lighting, ventilation, drain access, and necessary service space.

3.3 Transport and Storage

Procedures for transporting the machine upright and storing it correctly if not installed immediately.

3.4 Machine Installation

Steps for installing the machine, including checking overheating protection on the booster heater.

4. Directions for use

4.1 Preparations

Steps to take before filling the machine, including checks and fitting components.

4.2 Use

Instructions on selecting programs, changing settings, and operating the machine.

4.3 After Use - Cleaning

Procedures for cleaning the machine after use, including daily, weekly, and external cleaning.

Troubleshooting

Troubleshooting - Operator Handled Issues

Lists common problems, their causes, and actions that the operator can take to resolve them.

5. Technical Information

General Data

Provides general technical specifications for the machine's components and operation.

Capacity and Operation Data

Details on the machine's capacity, wash times, water consumption, and sound levels.

Connection, Machine

Technical data related to electrical connections, power, and cable specifications.

Connection Water, Drain and Ventilation

Specifications for water quality, connections, pressure, flow, and drain capacity.

CE Declaration of Conformity

Summary

Installation and User Manual

1. General

1.1 Symbols Used in Manual

Explains symbols used in the manual to convey warnings, safety instructions, and recommendations.

1.2 Symbols on Dishwasher

Details symbols found on the dishwasher and explains machine marking fields on the rating plate.

1.3 Manual and Appliance Agreement

Instructions on checking the appliance's type description against the manual for agreement.

2. Safety Instructions

2.1 General Safety

General safety guidelines, CE marking compliance, and personnel training requirements for safe operation.

2.2 Transport Safety

Guidelines for safe handling and transport of the machine to prevent tipping and damage.

2.3 Installation Safety

Safety measures for electrical cabinet access, ESD sensitivity, and water pipe connections.

2.4 Detergent and Drying Agent

Advises on using appropriate detergents and handling agents safely, including protective gear.

3. Installation

3.1 General

General guidelines for installation by authorised personnel, using diagrams and wiring information.

3.2 Requirements for Installation on Site

Site requirements including lighting, ventilation, drain access, and necessary service space.

3.3 Transport and Storage

Procedures for transporting the machine upright and storing it correctly if not installed immediately.

3.4 Machine Installation

Steps for installing the machine, including checking overheating protection on the booster heater.

4. Directions for use

4.1 Preparations

Steps to take before filling the machine, including checks and fitting components.

4.2 Use

Instructions on selecting programs, changing settings, and operating the machine.

4.3 After Use - Cleaning

Procedures for cleaning the machine after use, including daily, weekly, and external cleaning.

Troubleshooting

Troubleshooting - Operator Handled Issues

Lists common problems, their causes, and actions that the operator can take to resolve them.

5. Technical Information

General Data

Provides general technical specifications for the machine's components and operation.

Capacity and Operation Data

Details on the machine's capacity, wash times, water consumption, and sound levels.

Connection, Machine

Technical data related to electrical connections, power, and cable specifications.

Connection Water, Drain and Ventilation

Specifications for water quality, connections, pressure, flow, and drain capacity.

CE Declaration of Conformity

Metos WD-4 Specifications

General

Brand	Metos
Model	WD-4
Category	Dishwasher
Language	English

Related product manuals

Metos optiflow WD-153

Metos Master LUX 60-EL

33 pages

Metos Master LUX 40 EL

29 pages

Metos Master HOOD 130 LUX II

30 pages

Metos WD-4 - User Manual

Table of Contents

Other manuals for Metos WD-4

Questions and Answers

Summary

Installation and User Manual

1. General

1.1 Symbols Used in Manual

1.2 Symbols on Dishwasher

1.3 Manual and Appliance Agreement

2. Safety Instructions

2.1 General Safety

2.2 Transport Safety

2.3 Installation Safety

2.4 Detergent and Drying Agent

3. Installation

3.1 General

3.2 Requirements for Installation on Site

3.3 Transport and Storage

3.4 Machine Installation

4. Directions for use

4.1 Preparations

4.2 Use

4.3 After Use - Cleaning

Troubleshooting

Troubleshooting - Operator Handled Issues

5. Technical Information

General Data

Capacity and Operation Data

Connection, Machine

Connection Water, Drain and Ventilation

CE Declaration of Conformity

Summary

Installation and User Manual

1. General

1.1 Symbols Used in Manual

1.2 Symbols on Dishwasher

1.3 Manual and Appliance Agreement

2. Safety Instructions

2.1 General Safety

2.2 Transport Safety

2.3 Installation Safety

2.4 Detergent and Drying Agent

3. Installation

3.1 General

3.2 Requirements for Installation on Site

3.3 Transport and Storage

3.4 Machine Installation

4. Directions for use

4.1 Preparations

4.2 Use

4.3 After Use - Cleaning

Troubleshooting

Troubleshooting - Operator Handled Issues

5. Technical Information

General Data

Capacity and Operation Data

Connection, Machine

Connection Water, Drain and Ventilation

CE Declaration of Conformity

Metos WD-4 Specifications

Related product manuals