EasyManua.ls Logo

Metos WD-90GR FLEX - Cleaning; Pressure Washing; The Outside of the Machine; Cleaning the Floor

Metos WD-90GR FLEX
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WD-90GR Rev. 2.0 (20110515)
Safety instructions
3
1.6 Cleaning
The temperature of the water in the tank is approx. 58°C and contains detergent.
Be careful when draining and cleaning the tank. Use protective gloves.
1.6.1 Pressure washing
The machine must not be cleaned with a pressure washer. If pressurised water is
directed at the electrical cabinet, the water may penetrate the cabinet and dam-
age the electrical equipment, which may affect the safety of the machine.
In order to satisfy current requirements, electrical components of approved enclo-
sure classes are used. There is no enclosure class capable of withstanding high
pressure.
1.6.2 The outside of the machine
Pressure washers and hoses must not be used to wash the outside of the ma-
chine. Water can penetrate into the electrical cabinet and the control panel and
damage the equipment, which may affect the safety of the machine.
1.6.3 Cleaning the floor
When the floor is being cleaned using a pressure washer, water can splash up
under the machine and damage the components. These have not been designed
to withstand being washed with water. Never use a pressure washer to clean the
floor within 1 metre of the dishwasher without the special protective covers that
are available to prevent splashing. Problems with splashing can also occur when
using ordinary hoses.

Related product manuals