METRA. The World’s best kits.
®
metraonline.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 1/25/2017 INST95-9313B
Installation instructions for part 95-9313B
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
• ISO DDIN radio provision
• Painted matte black
• Relocates the factory climate control and switches
• Parts included to modify the factory airbox
• A) Radio trim panel • B) Back up housing • C) Radio brackets • D) Climate and switch panel housing
• E) Airbox cover • F) Cutting template • G) Climate bracket • H) Actuator arm • I) (1) #6 x 1/2” Phillips screw
• J) (4) #8 x 1/2” Phillips screws • K) (2) #8 x 3/8” Phillips screws • L) (2) panel clips • M) Vent door
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-8590 • 70-9003 (nav models 02-06)
Antenna Adapter: • 40-VW10 40-EU10 (nav models 02-06)
• Panel removal tool • Phillips screwdriver • Pick tool
TOOLS REQUIRED
BMW 3-Series 1999-2005,
3-Series
(coupe, convertible) 2006, M3 2001-2006
(for factory switch panel with one long opening)
95-9313B
A
C
G I JH
D E
K L M
B
Dash Disassembly ..............................................2-5
Sub-dash airbox modifications ..........................6-9
Kit Assembly
– ISO DDIN radio provision .................................... 10
Climate and Switch Panel Assembly .................. 11
Table of Contents
F
To Next Page
Need help?
General
