METREL A 1532 XA User Manual

A 1532 XA EVSE adapter Technical specifications
13
6 Technical specifications
6.1 General data
Input voltage .......................................... up to 250 V (1-phase), up to 430 V (3-phase)
Frequency ............................................. 50 Hz, 60 Hz
Maximum test current ............................ 267 A (10 ms) intermittent operation
Maximum load current ........................... 13 A, continuous operation (for test purpose only)
PP simulation......................................... open, 13 A, 20 A, 32 A, 63 A
CP simulation ........................................ states A, B, C, D
Error states ............................................ diode short, PE open, CP short to PE via diode
BNC connector
Resistance BNC case to PE .................. 100 kΩ
Resistance BNC contact to CP .............. 100 kΩ
Amplitude error (10 MΩ probe) .............. -2 %
Protection classification ......................... double insulation
Pollution degree ..................................... 2
Protection degree .................................. IP 40
Measuring category ............................... 300 V CAT II
Altitude .................................................. up to 3000 meters above sea level
Dimensions (w  h  l) ........................... 10 cm  7 cm  25 cm
Test lead(s) length ................................. 0.5 m
Weight ................................................ 0.90 kg
Operation conditions
Working temperature range ................... 0 C … 40 C
Maximum relative humidity .................... 95 %RH (0 C … 40 C), non-condensing
Storage conditions
Temperature range ................................ -10 C … +70 C
Maximum relative humidity .................... 90 %RH (-10 C … +40 C)
80 %RH (40 C … 60 C)

METREL A 1532 XA Specifications

General Data

input voltage	up to 250 V (1-phase), up to 430 V (3-phase)
frequency	50 Hz, 60 Hz
maximum test current	267 A (10 ms) intermittent operation
maximum load current	13 A, continuous operation
resistance BNC case to PE	100 kΩ
resistance BNC contact to CP	100 kΩ
altitude	up to 3000 meters above sea level

Operating Conditions

working temperature range	0 °C … 40 °C
maximum relative humidity (operation)	95 %RH (0 °C … 40 °C), non-condensing
storage temperature range	-10 °C … +70 °C
maximum relative humidity (storage)	90 %RH (-10 °C … +40 °C), 80 %RH (40 °C … 60 °C)

Weight and Dimensions

dimensions	10 cm × 7 cm × 25 cm
test lead(s) length	0.5 m
weight	0.90 kg