METREL A 1532 XA User Manual

A 1532 XA EVSE adapter Preface
4
1 Preface
Congratulations for purchasing and using METREL A 1532 XA EVSE adapter accessory with
METREL test and measuring instruments. The A 1532 XA is an extender for interfacing Electric
Vehicle Supply Equipment (EVSE) to test socket of installation tester for verification of electrical
safety and functional testing, inclusive load test. It is intended for testing Mode 3 EV supply
equipment with type 2 connector.
A 1532 XA EVSE adapter is a special accessory intended to be used with METREL installation
testers.

METREL A 1532 XA Specifications

General Data

input voltage	up to 250 V (1-phase), up to 430 V (3-phase)
frequency	50 Hz, 60 Hz
maximum test current	267 A (10 ms) intermittent operation
maximum load current	13 A, continuous operation
resistance BNC case to PE	100 kΩ
resistance BNC contact to CP	100 kΩ
altitude	up to 3000 meters above sea level

Operating Conditions

working temperature range	0 °C … 40 °C
maximum relative humidity (operation)	95 %RH (0 °C … 40 °C), non-condensing
storage temperature range	-10 °C … +70 °C
maximum relative humidity (storage)	90 %RH (-10 °C … +40 °C), 80 %RH (40 °C … 60 °C)

Weight and Dimensions

dimensions	10 cm × 7 cm × 25 cm
test lead(s) length	0.5 m
weight	0.90 kg