MD 9250 Clamp Meter Series Specifications
16
5 Specifications
Display: 3-5/6 digits 6000 counts. & 3-1/2 digits 1,999
counts for Hz
Polarity: Automatic
Update Rate: 5 per second nominal;
Operating Temperature: 0C to 40C
Relative Humidity: Maximum relative humidity 80% for temperature up
to 31C decreasing linearly to 50% relative
humidity at 40C
Pollution degree: 2
Storage Temperature: -20C to 60C, < 80% R.H. (with battery removed)
Altitude: Operating below 2000m
Temperature Coefficient: nominal 0.15 x (specified accuracy)/ C @(0C --
18C or 28C -- 40C), or otherwise specified
Sensing: True RMS
Safety: Double insulation per IEC/EN61010-1 2nd Ed.,
UL61010-1 2nd Ed. & CAN/CSA C22.2 No.
61010.1-0.92 to CAT IV 1000V AC & DC
Transient Protection: 12kV (1.2/50s surge)
Overload Protections:
Clamp-on jaws: 2000A rms continuous
“ + “ & COM Terminals (all other functions): 1000V rms
E.M.C.: Meets EN61326-1:2006 (EN55022, EN61000-3-2,
EN61000-3-3, EN61000-4-2, EN61000-4-3,
EN61000-4-4, , EN61000-4-5, EN61000-4-6,
EN61000-4-8, EN61000-4-11)
In an RF field of 3V/m:
Capacitance function is not specified
Other function ranges: Total Accuracy = Specified Accuracy + 200 digits
Performance above 3V/m is not specified
Power Supply: 1.5V AA Size (IEC LR6) battery X 2
Power Consumption: Typical 14mA for Current functions, and 5.2mA for
others
Low Battery: Below approx. 2.4V
APO Timing: Idle for 34 minutes
APO Consumption: 10A typical
Dimension: L264mm X W97mm X H43mm
Weight: 608 gm
Jaw opening & Conductor diameter: 55mm max
Accessories: Test leads (pair), user's manual, banana plug K-
type thermocouple x 1
Optional purchase accessories: USB interface kit AMD 9250; AMD9024 banana
plug to type-K socket plug adaptor
Special Features: AutoCheck
TM
V&; VFD-V & VFD-Hz; Backlighted
LCD; 5ms CREST-MAX Capture mode (Peak
Hold); Auto-ranging Relative-Zero mode; Display
Hold; EF-Detection (NCV); Optional Interface
capabilities with PC computers
To Next Page
Loading...
Need help?
General
