4-4 Compliance with international standards
Electrical safety (EN 61010-1 - 2001)
CEI 1010-1 EN61010 NF-C 42020 VDE 0411
■ Double insulation:
■ Pollution level: 2
■ Installation category: III according to CEI 664
■ Allocated voltage: 600V
4-5 Electromagnetic compatibility
■ Emission (EN 61326-A2 - 2001)
■ Immunity (EN 61326-A2 - 2001)
Maximum influence in the presence of conducted radio frequencies: 3 times
the accuracy class if the length of the measured circuit is > 3 m.
4-6 Mechanical protection
■ Watertightness (EN 60529/A1 - 2000)
Protection index: IP65
5 - SUPPLY
5-1 To order
MX1
Delivery:
- 1 MX1 multimeter
- 1 set of 2 leads with tips
- 4 fuses, 2 spares
- 1 fitted 1.5V battery
- 1 instructions leaflet
- 1 strap on the back of the casing
5-2 Spare parts and accessories
- 1 LR6 1.5V battery P01 2960 33
- 1 HPC fuse 1.6A / 6.3X32 / 600V / 50kA AT 0071
- 1 HPC fuse 10A / 6.3X32 / 600V / 50kA AT 0070
Different measurement accessories widen the scope of application or provide the
altimeter with new functions.
Documentation on request.
- Current clamp:
ratio 1000/1 (MN08) P01 1204 01
- Carry case
240 x 230 x 70mm with strap P01 2980 33
- Set of leads with tips
P01 2950 84
- Set of crocodile clamps
P01 1018 48
- 30kV
DC
high voltage probe , ratio 100/1 HT 212
16
To Next Page
Loading...
