access to the Motor Setup menu ).
• Go to Position field.
• With 34 arrow keys, select the number of the satellite that you want to allocate to the
current satellite. (Ignore the warning message)
• Press OK to confirm, the motor will move to the position #1 stored in its memory. Once the
motor has stopped, check that the Quality is higher than 40%. If not, it means that the motor
is not correctly aligned, or that you input a wrong number.
• Press EXIT until you exit all menus and check that you duly receive the channels from
HotBird (or other satellites, after)
Do the same procedure for the other satellites.
To Next Page
Loading...
