Simply connect your video cassette recorder on the VCR scart socket. To record the digital, it is
necessary that the receiver is switched on the channel you want to record. Remember that you
can automatically switch the receiver ON with the Timer feature. Put the VCR on the channel
dedicated to its scart input (0, AV, EXT....) and launch the recording. If you encounter a problem
to do so, check the user guide of the video cassette recorder for exact operating.
To play a tape, just press the PLAY key of your VCR, it will automatically take the hand over the
satellite receiver. If not, try and press on TV/VCR key of your VCR remote control.
16 - Use with a VCR
To Next Page
Loading...
