• The screen displays « BAD OR NO SIGNAL».
Two causes :
1. The channel you wish to watch has disappeared from the transponder. Get a specialised
magazine to know if the parameters of these channels have changed or if it has disappea-
red.
2. The motor is moving, wait until it has reached its final position.
• On one or more channels, the screen is black.
The channel you want to watch is probably scrambled. For your information, an operator can
broadcast a scrambled channel with information that lets believe the receiver that the channel is
free. The opposite situation is also possible.
Beware: A channel can be free for a certain period in the day, and pay-TV in other
periods.
• The terminal asks me a PIN code to watch a channel.
Enter 0000 if you did not input any PIN code. If you input a PIN code, but you forgot it, contact
the hotline.
18 - Troubleshooting
To Next Page
Loading...
