Meyer Sound RMServer - Page 8

CHAPTER 1: INTRODUCTION
8
■ For loudspeakers requiring an UltraSeries RMS module,
see “Installing the UltraSeries RMS Module” on page 37.
To enable mute and solo capabilities in these loudspeak-
ers, see “Installing the Mute Jumper on the UltraSeries
RMS Module” on page 38.
■ For loudspeakers requiring a DX RMS module, see
“Installing the DX RMS Module” on page 41. To enable
mute and solo capabilities in these loudspeakers, see
“Remote Mute Switch” on page 42