MFJ-495 Memory Keyer Instruction Manual
8 © 2001-2009 MFJ Enterprises, Inc.
The setup menus are also arranged in a "wrap-around" structure, so that pressing the Previous or Next
button will bring up another setup menu in a sequence. Also, momentarily pressing the Menu button will
bring up the next setup menu. Figure 5 shows the sequence of the setup menus. When entering the setup
menus, the setup menu displayed is the one that was last used.
To see how the setup menu system works, consider the following example.
EXAMPLE: To enter the setup menu, press and hold the Menu button for two seconds. If the
display shows that you are in the Overall Speed menu, pressing the Next button would put you in
the Farnsworth menu and pressing the Previous button would put you in the Speed Ratio menu.
Pressing the Down or Up button would lower or raise the overall code speed. Once you have
selected the speed you desire, you may leave the setup menu by pressing the Menu button again
for two seconds; or press Previous or Next button to go to another setup menu.
Once you have made your choices within the setup menus, they will be saved in non-volatile memory for
your next session.
To Next Page
Loading...