Need help?Do you have a question about the MFJ MFJ-495 and is the answer not in the manual?
General| Brand | MFJ |
|---|---|
| Model | MFJ-495 |
| Category | Accessories |
| Language | English |
Describes the MFJ-495 Memory Keyer, its features, and connectivity options.
Details the controls, display, and LEDs on the front of the MFJ-495.
Explains the rear panel connections including power, audio, keying, serial, and keyboard ports.
Instructions for connecting the MFJ-495 to a computer via the serial port.
Explains the fundamental operation of the memory keyer.
Guide to navigating and using the keyer's menu system and buttons.
Overview of the seven main menus for accessing keyer functions.
Details on playing and saving messages using MSG1-MSG4 buttons.
Details on playing and saving messages using MSG5-MSG8 buttons.
Function of the COM button for entering command mode.
How to use the DEC button to decrement the serial number.
Function of the CXT button for engaging carrier tune mode.
Function of the PXT button for engaging pulse tune mode.
Adjusting the overall code speed of the keyer.
Settings for Farnsworth mode to improve CW learning.
Adjusting the code element timing (weight).
Setting the sidetone audio frequency.
Procedure for switching between memory banks A, B, C, and D.
Shortcuts for accessing message menus.
Sets the ratio of the speed control between its minimum and maximum positions.
Configures the overall code speed in WPM.
Enables or disables Farnsworth mode and sets its speed.
Sets code weight at the counter-clockwise speed control position.
Sets code weight at the clockwise speed control position.
Adjusts the spacing between characters.
Adjusts the spacing between words.
Compensates for transmitter keying distortion or delay.
Sets a delay for the keying output to accommodate switching.
Configures the time the PTT remains active after keying ends.
Adjusts the sidetone frequency and audio characteristics.
Sets and formats the contest serial number.
Sets the format for leading zeros in the serial number.
Sets the format for non-leading zeros in the serial number.
Sets the format for nines in the serial number.
Enables or disables iambic keying modes (A or B).
Reverses the paddle designation (dot/dash).
Selects paddle mode: automatic, semi-automatic, or hand-key.
Toggles the sidetone monitor on or off.
Enables or disables the keying output.
Enables or disables the message queue feature.
Selects one of four user configurations.
Instructions for connecting and using a paddle with the keyer.
Lists and explains setup commands for paddle and keyer configuration.
How to play, save, and edit messages in memory.
Procedures for transferring messages between computer and keyer.
Instructions for connecting and using a keyboard with the keyer.
Lists special functions accessible via keyboard key combinations.
How to use a computer terminal program to communicate with the keyer.
Lists and explains setup commands executable via the terminal.
Details the organization and capacity of the keyer's memory.
Guide to preparing messages using an ASCII text editor.
Using commands within messages to control keyer functions during playback.
Procedure to reset the keyer to factory default settings.
Instructions for erasing all stored messages or individual messages.
Procedure for running a self-test routine to check keyer functions.
Procedure to test the keyer's power down circuitry.
Answers common questions and resolves operational issues.
Contact information and guidelines for seeking technical support.
A reference chart of Morse code characters, numbers, and prosigns.
Common signals and their meanings used in radio communication.
A list of common abbreviations used in CW communication.
Definitions of standard Q signals used in radio communication.
A comprehensive table summarizing all setup commands via different input methods.
The electronic schematic diagram of the MFJ-495 Memory Keyer.
Details the terms and conditions of the product's 12-month limited warranty.
To Next Page