MFJ MFJ-495 - Signals Used in Other Radio Services; Some CW Abbreviations

MFJ-495 Memory Keyer Instruction Manual
40 © 2001-2009 MFJ Enterprises, Inc.
/W##
Weight – sets the code weight to ## percent, where ## represents two digits in the range of 25
to 75.
/WU#
/W+#
Weight Up – increases the code weight by # percent, where # is a single digit in the range of
0 to 9.
/WD#
/W–#
Weight Down – decreases the code weight by # percent, where # is a single digit in the range
of 0 to 9.
/X##
Xmit – keys the keyer for ## seconds, where ## represents two digits in the range of 01 to 99.
When setting time under 10 seconds, leading zero must be used. Time greater than 99
seconds is obtained by using consecutive commands that total the desired value. Set ## to 00
to key continuously for tuning the transmitter. For example: KEY 1 SEC /X01 KEY 1
MIN /X60 KEY 1 MIN 39 SEC /X99 KEY 2 MIN /X60 /X60 KEY INFINITE /X00.