GB
CS 300 Gate Controls / rev. 04.06 – 3
Regulations and bases for testing
For connecting, programming and servicing, the
following regulations must be observed (the list is not
exhaustive).
Construction product standards
- EN 13241-1 (Products without fi re resistance or
smoke control characteristics)
- EN 12445 (Safety in use of power operated doors
- Test methods)
- EN 12453 (Safety in use of power operated doors
- Requirements)
- EN 12978 (Safety devices for power operated doors
and gates - Requirements and test methods)
Electromagnetic compatibility
- EN 50081-1 (Radio disturbance, household
appliances)
- EN 50082-1 (Immunity, household appliances)
- EN 50014-1 (Emission, household appliances)
- EN 61000-3-2 (Disturbances in supply systems
- harmonic currents)
- EN 61000-3-3 (Disturbances in supply systems
- voltage fl uctuations)
Machinery guidelines
- EN 60204-1 (Safety of machinery, electrical
equipment of machines)
- EN 292-1 (Safety of machinery - Basic concepts,
general principles for design - Basic terminology,
methodology)
Low voltage
- EN 60335-1 (Household and similar electrical
appliances - Safety)
- EN 60335-2-103 (Particular requirements for
drives for gates, doors and windows)
Professional association (D)
- BGR 232 (Directive for Power-driven Windows,
Doors and Gates)
4.1 Various options4.1 Various options
The following package options are available for the
CS 300 controls:
- CS 300 control with LCD monitor
- CS 300 control with LCD monitor in housing
- CS 300 control with LED module for setting
the OPEN and CLOSED door positions (further
adjustment settings are not possible)
- CS 300 control without LED module and without
LCD monitor (module or monitor are required for
adjusting the settings)
All the above options can be fi tted with a plug-in
weekly timer and a plug-in radio receiver.
The following options are available for the housing.
- housing with 3-button input unit
- housing with membrane keypad
- housing with key switch ON/OFF
- housing with main switch
- housing with emergency off switch
The operating instructions describe the connection
possibilities and programming procedures for the
different models:
- CS 300 control with LED board
- CS 300 control with attached LCD display board
4. Overview of products GB
To Next Page
Loading...