MG Hector - Page 76

7574
INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
Interface - 2
Fatigue Driving Warning Setup
Enter the fatigue driving function setup
interface and you can make fatigue driving
function setup. Once the driving time reaches
or exceeds the set value, a text warning
message will appear on the LCD, accompanied
by a sound alarm. The system reminds you to
have a rest if necessary in this way. You can
also disable the fatigue driving function by
selecting the corresponding option on this
interface. The fatigue driving function gets
disabled by fault once the battery power is cut
off.
Set range of fatigue driving warning: 1 h~ 4 h at
an increment/decrement of 0.5 h.
Multimedia Information Option
Choose this option and the instrument cluster
will show AM, FM or audio information real-
time on the screen. If the instrument cluster
has not connected to the relevant system,
“Connecting Multimedia” will appear on the
screen.
Bluetooth Telephone Information Option
Choose this option and the Bluetooth
telephone interface will appear. If the
instrument cluster has not connected to
Bluetooth telephone, “Telephone Not
Connected” will appear on the screen. After
su c c ess f u l co n n ec t i on, “ T ele p h on e
Connected” will appear on the screen.
The instrument cluster will show the current
state of Bluetooth telephone on the screen:
“incoming call”, “outgoing call” and “on the
line”.
In addition, the instrument cluster will also
show the current telephone number and name
of the contact on the screen.
Navigation Information Option
Choose this option and the instrument cluster
will show “road name”, “destination”
“distance information” or indication icon on
the screen, depending on the current state of
the navigation system.
If the instrument cluster has not connected to
the n avigation sys tem , “Connecting
Navigation” will appear on the screen.
Gear Position Display*
(Equipped on AT Model Only)
The automatic transmission has two control
types: manual and automatic, displayed as “M”
and “A” respectively.
Gear position display prompt includes two
parts: mode prompt and gear position prompt.
In automatic (A) mode, two transmission
control modes are available: economy and
sports, displayed as “E” and “S” respectively.
In automatic (A) mode, three gear positions
will be displayed: D, R and N.
In manual (M) mode, the following gear
positions will be displayed: 1, 2, 3, 4, 5, 6 (if
equipped), R and N. When driving in this
mode, you will be reminded to shift up as the
vehicle speed reaches certain value and at the
same time, the arrow icon (↑) in the gear
position display area will illuminate.
For more details, please refer to “Automatic
Transmission” in the driving and control
section.
Door Ajar Warning Lamp
If any door in the front or rear row is ajar or
not fully closed, a warning lamp shaped like the
door ajar will illuminate; if the liftgate is ajar or
not fully closed, a warning lamp shaped like a
liftgate ajar will illuminate or flash.
If any door is not fully closed while the vehicle
is running at a speed of 10 km/h, a door ajar
alarm sound will be issued.