164
Bulb Replacement
REAR LIGHTS (Saloon models only)
Take care to avoid any contact with a hot exhaust system,
when carrying out any maintenance at the rear of the car.
Insert a flat bladed screwdriver into the slot on the first fastener (see
upper inset) and lever the central portion out of its collar, so that
it can be pulled out approximately 11 mm.
Use a cross-head screwdriver to rotate the second fastener
(illustrated in lower inset) a quarter turn anti-clockwise and pull
back the moulded lining as shown.
HB0117
To Next Page
Loading...
Need help?
General
