Need help?Do you have a question about the MGE UPS Systems Comet Series and is the answer not in the manual?
General| Type | Line Interactive |
|---|---|
| Input Voltage | 230V |
| Input Connection | IEC 320 C14 |
| Humidity | 0-95% non-condensing |
| Output Voltage | 230V |
| Transfer Time | 2-6 ms |
| Battery Type | Sealed Lead Acid |
| Output Connections | 4 x IEC 320 C13 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
Device compliance with FCC Rules, subject to specific conditions for operation.
Unauthorized modifications can void the user's authority to operate the equipment.
Equipment meets Class A digital device limits for commercial environments.
Contact MGE UPS Systems for operational, repair, or servicing needs.
Manual content is proprietary to MGE UPS Systems, Inc., with usage restrictions.
This manual describes the 40-150 kVA Comet UPS family, its installation, and use.
Overview of Comet UPS as compact, high-efficiency, and optimized for nonlinear loads.
Details system specifications, internal components, options, and ratings.
Explains the function of key components like Rectifier, Inverter, and Battery System.
Describes optional auxiliary and extended battery cabinets for UPS systems.
Details installation, receiving, handling, storage, and procedures.
Instructions for accepting shipment, inspecting, and moving equipment.
Guidelines for storing the UPS equipment before installation.
Covers environmental, mechanical, and electrical requirements for installation.
Details AC input, bypass AC input, REPO, AC output, and battery connections.
Explains basic AC input, on-battery, and bypass operation modes.
Describes front panel controls, indicators, LEDs, and pushbuttons for system status.
Step-by-step guide for powering up the UPS and initial setup.
Covers normal operation, battery use, overload, and bypass modes.
Lists and explains various alarm messages and fault conditions for troubleshooting.
Crucial safety precautions for servicing and handling batteries to prevent hazards.
Recommended routines for ensuring optimal UPS performance and longevity.
Details levels of replacement parts and recommendations for stocking based on needs.
Explains symbols and defines technical terms used throughout the manual.
To Next Page