MGI DNBSEQ-T7 - Page 2

To Next Page

To Previous Page

About the user manual

This user manual is applicable to DNBSEQ-T7 Genetic Sequencer.

The manual version is 1.0 and the software version is V1 and above.

The catalog number of the device is 900-000241-00.

This manual and the information contained within are proprietary to

Wuhan MGI Tech Co., Ltd. (hereinafter called MGI), and are intended

solely for the contractual use of its customer in connection with the

use of the product described herein and for no other purpose. Any

person or organization can not entirely or partially reprint, copy,

revise, distribute or disclose to others the manual without the prior

written consent of MGI. Any unauthorized person should not use

this manual.

MGI does not make any promise of this manual, including (but not

limited to) any commercial of special purpose and any reasonable

implied guarantee. MGI has taken measures to guarantee the

correctness of this manual. However, MGI is not responsible for any

missing parts in the manual, and reserves the right to revise the

manual and device, so as to improve the reliability, performance or

design.

Figures in this manual are all illustrations. The contents might

be slightly different from the device, please refer to the device

purchased.

DNBSEQ

is a trademark of MGI or its subsidiaries in China and/

or other countries. Microsoft

and Windows

are trademarks or

registered trademarks of Microsoft Corporation in the U.S. and/

or other countries. Intel

and Intel Core

are trademarks of Intel

Corporation or its subsidiaries in the U.S. and/or other countries.

Other names and brands mentioned in this manual might be claimed

as the property of others.