2 Instructions GD1-GD10
Information
1 Warnings 3
2 Product description 4
2.1 Applications 4
2.2 Description of the automation 4
2.3 Description of devices 5
2.3.1 GD1K and GD10K Electromechanical Gearmotor 5
2.3.2 PH1 photocells (optional) 6
2.3.3 KS1 key-operated selector switch (optional) 6
2.3.4 FL1 flashing light with incorporated aerial (optional) 6
2.3.5 TX4 radio transmitter 6
3 Installation 7
3.1 Preliminary checks 7
3.1.1 Operating limits 8
3.1.2 Tools and Materials 8
3.1.3 List of cables 9
3.2 Preparing the Electrical System 9
3.2.1 Connection to the Electrical Mains 9
3.3 Installation of the Various Devices 10
3.3.1 Assembly of the guide supplied with GD1 10
3.3.2 Assembly of the guide supplied with GD10 11
3.3.3 Fixing of the gearmotor to the guide 13
3.3.4 Fixing of the gearmotor to the ceiling 13
3.3.5 Photocells (optional) 15
3.3.6 KS1 key-operated selector switch (optional) 15
3.3.7 FL1 flashing light (optional) 16
3.3.8 Electrical connections to the control unit 17
3.4 Power Supply Connection 18
3.5 Initial checks 18
3.5.1 Recognition of Connected Devices 18
3.5.2 Learning of the door's open and closed positions 19
3.5.3 Testing the radio transmitter 19
3.6 Regulations 20
3.6.1 Selecting door speed 20
3.6.2 Selecting the type of operating cycle 20
3.7 Testing and Commissioning 20
3.7.1 Testing 20
3.7.2 Commissioning 21
4 Maintenance 21
4.1 Dismantling and Disposal 21
5 Additional Information 22
5.1 Advanced Adjustments 22
5.1.1 Adjusting the Parameters with the Radio Transmitter 22
5.1.2 Checking the Adjustments with the Radio Transmitter 23
5.2 Optional Accessories 23
5.3 Adding or Removing Devices 23
5.3.1 ECSBus 23
5.3.2 STOP Input 23
5.3.3 Recognition of Other Devices 24
5.3.4 Addition of Optional Photocells 24
5.4 Memorization of Radio Transmitters 25
5.4.1 Memorization Mode 1 25
5.4.2 Memorization Mode 2 25
5.4.3 Remote memorization 25
5.4.4 Deleting a Radio Transmitter 26
5.4.5 Deleting all the Radio Transmitters 26
5.5 Troubleshooting 26
5.6 Diagnostics and Signals 27
5.6.1 Photocells 27
5.6.2 Flashing and courtesy lights 27
5.6.3 Control Unit 28
6 Technical characteristics 29
7 Annexes 32
7.1 Allegato 1: CE Declaration of Conformity of GD Components 33
7.2 Annexe 2: CE Declaration of Conformity of Power Operated
Sectional or Up-and-over Door 35
7.3 Annexe 3. OPERATING GUIDE 37
7.3.1 Safety regulations 37
7.3.2 Door Control 37
7.3.3 Maintenance Operations to Be Performed by the User 38
7.3.4 Replacing the Remote Control Battery 38
7.3.5 Lamp replacement 38
Contents
This manual may be reproduced provided no part of it is omitted or
modified. No part of this manual may be translated into other languages
without the prior authorization and subsequent examination by
MHOUSE.
MHOUSE disclaims all responsibility for damage resulting from improper
use of its products. You are therefore invited to read this manual carefully.
MHOUSE, in order to improve its products, reserves the right to modify
them at any time without prior notice. In any case, the manufacturer
guarantees their functionality and fitness for the intended purposes.
For any information please contact:
MHOUSE S.r.l.
via Pezza Alta, 13, ZI 31046 Oderzo
Tel: 0422 202109
Fax: 0422 852582
email: info@mhouse.biz
http: www.mhouse.biz
To Next Page
Loading...
