Mic AV8 - TPMS Sensor and Battery Management; External Sensor Mounting; TPMS Battery Replacement

To Next Page

To Previous Page

- 25 -

c. Screw LR sensor onto LR tire valve stem tightly d. Spin hexagon nut counterclockwise tightly by

supplied spanner

e. Make sure there is no air leak from stem. following the above step to install other sensors

(3) Battery replacement

a. Separate hexagon nut from sensors using supplied spanner.

b. Remove sensor from tire valve

c. Unscrew lid counter clockwise from sensor housing using spanner.

d. Remove old battery and insert a new one(battery positive side is facing up)