November 2020
Page 1 of 21
Table of Contents
Table of Contents 1
Introduction 2
Firmware 2
What’s Included? 2
Lens and Imager Information 3
Center wavelengths and bandwidth 3
Cameras with serial number RX02 or higher 3
Cameras with serial number RX01 4
Imager/band number and output 4
Measurements and Attachment Points 5
Recommendations for Installation
8
Configuration Options 9
Default + Overlap mode 9
Default + trigger by HTTP API 10
MAVLink with PixHawk or similar flight controller 11
DLS 2 with Aircraft GPS 11
HTTP Connection 12
Serial Connection 12
Input and Output 12
External Power and External Trigger (“PWR/TRG”) 13
Serial and Ethernet Data (“COMM”) 15
Power supply specifications 16
USB port 16
Capture Rate 16
Automatic Capture/Triggering 17
Overlap (recommended) 17
Timer 17
External Triggering 18
External Trigger 18
HTTP API (Ethernet and Wi-Fi) 18
Serial API 18
Disabled 19
To Next Page
Loading...
Need help?
General
