MicaSense RedEdge-M - Thank You for Your Purchase

Thank you for your purchase!

These instructions show how to use the OEM Dual Camera Kit to help integrate MicaSense
RedEdge-M, RedEdge-MX and RedEdge-MX Blue on non-DJI drones or unique integrations. It
covers attaching mounting brackets included in the kit and guidelines for custom integrating
the DLS2.

NOTE: This kit does NOT provide a means of attaching the OEM Dual Camera Kit to
the drone. This kit is intended to provide power, communication, and to ensure that
the cameras are properly spaced for accurate data collection.

Warning: This kit is not intended for any other RedEdge models other than the
RedEdge-M/MX. Damage will occur if any other RedEdge model is connected.

Both the RedEdge-M/MX and RedEdge-MX Blue need to be updated to the latest
firmware. The system will not operate if the firmware versions do not match. You can
find the latest firmware at: https://www.micasense.com/firmware-updates 

Rev 01 - March 2020
PAGE 2

