Need help?Do you have a question about the MicaSense RedEdge and is the answer not in the manual?
General| Spectral Bands | Blue, Green, Red, Red Edge, NIR |
|---|---|
| Band Central Wavelength | Blue: 475nm, Green: 560nm, Red: 668nm, Red Edge: 717nm, Near Infrared: 840nm |
| Bandwidth | Blue: 20 nm, Green: 20 nm, Red: 10 nm, Red Edge: 10 nm |
| Image Resolution | 1280 x 960 pixels per band |
| Capture Rate | 1 capture per second |
| Field of View | 47.2° HFOV |
| Power Requirements | 7-25 V DC |
| Sensor | 5 individual sensors |
| Interfaces | Serial, Ethernet |
| Operating Temperature | 0-50° C |
| Storage Temperature | -20-60° C |
| DLS | Integrated Downwelling Light Sensor (DLS) |
| Sensor Type | Global Shutter CMOS |
Lists the components included in the MicaSense RedEdge/3DR Solo integration kit for assembly.
Details the necessary tools and equipment for the installation process.
Guides on how to connect the power board to the 3DR Solo drone system.
Instructions for mounting the Downwelling Light Sensor (DLS) and GPS mast.
Explains how to upload, process, and review data using MicaSense Atlas.
To Next Page
