To Next PageTo Next Page
Need help?Do you have a question about the Micca origen+ and is the answer not in the manual?
Overview of the OriGen+ capabilities, including inputs, outputs, formats, and components.
Details the physical input and output connections on the OriGen+ unit.
Lists supported digital audio stream formats for USB and Optical inputs.
Identifies the main internal hardware components of the OriGen+.
Lists the items included in the OriGen+ package.
Compliance with FCC Rules, including interference and radiation exposure limits.
Identifies and describes the various ports, switches, and the display on the OriGen+ unit.
Step-by-step guide for downloading and installing the Windows drivers for the OriGen+.
Instructions on configuring playback devices in Windows for optimal audio output.
Notes limitations of the VIA USB Device Deck on Windows 10 and alternative settings.
Advice for users upgrading to Windows 10 after installing OriGen+ drivers.
Steps to disable driver signature enforcement for first-time Windows 10 installations.
Recommendations for setting up Foobar2000 for optimal audio output via OriGen+.
Guide to configure Foobar2000 for DSD audio playback using the OriGen+.
Steps to configure JRiver Media Center for DSD playback on Windows.
Steps to configure JRiver Media Center for DSD playback on OS X.
Explains the function of the LED display grid indicating the OriGen+ operating status.
Details the operation of the volume knob, which also functions as the power switch.
Describes the function of the switch that selects between USB and Optical S/PDIF inputs.
Explains how the switch directs audio output to either the rear analog stereo or headphone jacks.
Details the micro USB input for connecting to computers and mobile devices.
Describes the optical input for PCM signals from various audio sources.
Explains the purpose of the DC input jack for external power adapters.
Describes the 3.5mm rear output for connecting amplifiers or powered speakers.
Details the optical output for transporting digital audio signals to an outboard DAC.
Explains the two headphone jacks and recommended impedance for connected headphones.
Lists general specifications including formats, interface, controller, DAC, and dimensions.
Provides technical specifications for the line output, including frequency response and THD+N.
Lists technical specifications for the headphone output, including voltage, current, and impedance.
General| Audio Formats Supported | PCM |
|---|---|
| Input Connections | USB, Optical, Coaxial |
| Power Supply | USB bus powered |
| Type | DAC and Headphone Amplifier |
| Bit Depth | 16-bit, 24-bit |
| Headphone Amplifier | Yes |
| Output Connections | RCA, Headphone |
| USB Interface | USB 2.0 |
| USB Input | USB 2.0 |
| Sample Rate (USB) | up to 192kHz |
| Bit Depth (USB) | up to 24-bit |
| Headphone Impedance | 16-300 Ohms |
| Supported Sample Rates | 44.1kHz, 48kHz, 96kHz |
