Miccus BBRTX-01 - System Requirements; Detailed Instructions for Use

4
System Requirements
TransmitMode(TX): Use the Home RTX with any device capable
of receiving a Bluetooth® wireless audio signal (A2DP), including
Bluetooth® enabled headphones, or adapters such as the SR-71
Stealth Headphones, Home RTX, and Swivel Jack RTX.
ReceiveMode(RX): Use the Home RTX with any device capable of
transming a Bluetooth® wireless audio signal (A2DP). Such capable
devices include phones, tablets, and PCs or Bluetooth® audio adapters
such as the Home RTX, the Home RTX Mini, or Swivel Jack RTX.
DetailedInstruconsforUse
Poweron/o
The Miccus® Home RTX is powered only by mini USB power; there is
no baery to charge.
Connect one end of the included USB power cable to the Home RTX
USB jack; connect the other end to a compable USB power supply unit
(5V/500mA) computer USB port. Any USB charger that is rated at an
output of 5V@500mA or higher is compable and may be used with
the Home RTX.
For opmal performance, always use the provided USB cable which
features a ferrite core to help eliminate radio frequency interference
during operaon. While any USB charger that is rated at an output of
5V@500MA or higher is compable, you may experience buzzing or
less signal range while using another USB cable.
Note: Leave the Home RTX connuously powered on to automacally
reconnect when the last paired device is within range. In order to
maintain memory of the last paired device, the Home RTX must remain
connuously connected to USB power.