3OPERATING MANUAL
SAVE THESE INSTRUCTIONS
GENERAL SAFETY RULES
WARNING: Read and understand all instructions.
Failure to follow all instructions listed below may result in serious injury.
CAUTION
!!
Do not allow persons to operate or assemble this ACDC200LCD
until they have read this manual and have developed a thorough
understanding of how the ACDC200LCD operates.
WARNING
!!
The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or
situations that could occur. It must be understood by the operator
that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
IMPORTANT SAFETY CONSIDERATIONS
Your Welding Environment
• Keep the environment you will be welding in free from ammable materials.
• Always keep a re extinguisher close to your welding environment.
• Always have a qualied person install and operate this equipment.
• Make sure the area is clean, dry and well ventilated.
Do not operate the welder in humid, wet or poorly ventilated areas.
• Always have your welder maintained by a qualied technician in accordance
with local, state and national codes.
• Always be aware of your work environment. Be sure to keep other people,
especially children, away from you while welding.
• Keep harmful arc rays shielded from the view of others.
• Mount the welder on a secure bench or cart that will keep the welder secure and
prevent it from tipping over or falling.
To Next Page
Loading...
