MICODUS MV55G - Package Content; Functions Explanation

4. Package Content
GPS Main Unit
User Manual
Quick User Guide
Genuine Packing Box (Optional)
OBD Extension Cable (Optional)
x 1
x 1
x 1
x 1
x 1
5. Functions Explanation
a. Vibration Alert：
This vibration alert function just work under
stationary status.How to use this function:
*
First Step:
Configure SOS numbers for
the tracker by this sms command：
SOS,A,1st number,2ndnumber,3rd number#
3 SOS numbers supports at the most.
*
Second Step:
Enable the device to enter into arm
mode by this sms command:
ARM#
* Third Step:
Conifgure the alarm ways by this sms command：SENALM,[A][,M]#
* Fourth Step:
Keep the device under stationary status more than 5min to let it enter into sleep arm
mode;
*
Five Step:
Vibrate the device then the tracker will send the vibration alarm messages.
A=ON/OFF, default: OFF;
M=0/1/2, way of alarming,
( 0 :Platform only, 1: SMS+Platform,
2: Platform+SMS+phonecall, Default:1)
Please follow with the quick user guide carefully!
For example:
SOS,A,12345678910#
ARM#
SET SOS NUMBER OK
SENALM,ON,1#
SET VIBRATE ALARM OK
SET ARM MODE OK
MV55G
Note: The APN information is very important, it must 100% correct to match with the sim
FDUGRIWKHWUDFNHULI\RXFRQ¿JXUHGZURQJ$31WKHWUDFNHUDOVRZLOOUHSO\6(7$31RN
but it will can't get online!