MICODUS MV730 - Parameter Query; Status Check; Sleep Mode Management; Vibrate Alarm Configuration

Movement alarm distance scope: 100-1000m
firmware version、ID、IP、port、domain、APN
admin number, SOS number,move distance, overspeed,
auto arm time, auto disarm time, alarm interval
BAT:10 GPRS: GSM: GPS:A/V ACC:on/off oil:on/off
power:on/off
Parameter Query
Status
Arm
Sleep Mode
param1
param2
status
111 or SF
sleep123456 time
sleep123456 shock
sleep123456 off
Functions Command Format Explanation
Vibrate Alarm
Tow Alarm towA,B
A: 1-4, 1: SMS alarm, 2: Call alarm, 3: SMS+Call,
4: Platform alarm; B: Distance (500-10000m)
vibx,y
x=1-3( 1: SMS alarm, 2: Call alarm, 3: SMS first then Call );
y=1-9,1 is the most sensitive
Cancel sleep mode
vibcall+123456
Vibrate call alarm set ok ( If device keep stationary more than
5 minutes the device will enter into sleep mode automatically,
vibration, sms commands and call can wake up it)
Vibrate sms alarm set ok(If device keep stationary more than
5 minutes the device will enter into sleep mode automatically,
vibration, sms commands and call can wake up it)
vibalm+123456
Auto Arm By ACC acclt,time Time scope:5-1200 seconds
Disarm 000 or CF
Cut Off Fuel 555
Resume Fuel 666
Movement Alarm move+alarm distance
Overpeed alarm speed scope: 20-150km/h
Overspeed Alarm
speed+123456+space
speed limit
IMEI Checking imei+123456
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, sms commands and
call can wake up it
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, vibration, sms
commands and call can wake up it