Functions Command Format Explanation
8. Full SMS Commands List
Parameter Query
param,1
param,2
Status status
firmware version、ID、IP、port、domain、APN
admin number, SOS number,move distance,
overspeed, auto arm time, auto disarm time,
alarm interval
BAT:10 GPRS: GSM: GPS:A/V ACC:on/off
oil:on/off power:on/off
imei123456IMEI Checking
Check Command
Password
Google Maps Link
Set Admin Number
admin123456,number
V:A: Indicates the device has GPS signal;
V:V: Indicates the device doesn't have GPS signal;
2019-11-26 10:17:01: Date and Time;
S: 000km/h: Speed of the tracker
Bat:5: Battery level of the backup battery of the
tracker, it has 6 levels: "6" means 100% , "5" 80%,
"4" means 60%, "3" means 40%, "2" means 20%,
"1" means 10%;
ACC: off: The status of the car engine;
7201000006: ID number of the device;
S26: GSM signal is 26 G06: GPS signal is 06
p:46000, l:13152, c:63162: p,l,c this 3 parameters
means the LBS code
getpsd
G123456# or where
Command Password
Change
setpwd123456,new password
The password just can be 6 digitals
Example: admin123456,008613566669999
Please add your country code as prefix of the admin
number
Set SOS Numbers
SOS,SOS1,SOS2
Example: SOS,008613566668888,008613566669999
Please add your country code as prefix of the admin
number
Back to Factory Setting begin123456
After sent this sms command, all your configuration will
be cleared and the device will get back to factory default
settings
After sent this sms command, the configurations will be
saved and the device will restart
Restart rst
A=1 ON ; A=0 OFF; Default: 1
Data Traffic Switch gprs123456,A
Query Commands
Setting Commands
To Next Page
Loading...
