4 | POWER PACK SERVICE MANUAL MICROMATIC.COM | 866-327-4159
EQUIPMENT SPECIFICATIONS
MODEL MMPP4302 MMPP4302-WC MMPP4302-PKG MMPP4302-PKG-WC MMPP4303-PKG
Type Air Cooled Water Cooled* Air Cooled Water Cooled* Air Cooled
BTUs* 3,600 3,600 3,600 3,600 5,100
Compressor HP 1/2 1/2 1/2 1/2 3/4
Glycol Pumps 1 1 2 2 2
Pump Type
Rotary Vane Rotary Vane Rotary Vane Rotary Vane Rotary Vane
Pump GPH
80 80 80 80 80
Pump Motor HP
1/3 1/3 1/3 1/3 1/3
Pump Inlet/Outlet Barbs 9.52mm (3/8") 9.52mm (3/8") 9.52mm (3/8") 9.52mm (3/8") 9.52mm (3/8")
Plug Type
5-20P 5-20P L5-30P L5-30P 6-15P
Voltage
115 115 115 115 208/230
Amps (Running) 15.4A 14.9A 21.0A 20.5A 9.5A
Refrigerant R134a R134a R134a R134a R134a
Charge (oz.)
0.45 kg (16 oz) 0.51 kg (18 oz) 0.45 kg (16 oz) 0.51 kg (18 oz) 0.79 kg (28 oz)
Refrigerant
Running Pressures
18 (low)
140 (high)
18 (low)
140 (high)
18 (low)
140 (high)
18 (low)
140 (high)
18 (low)
140 (high)
Dimensions
L x W x H Including
pump(s) and motor(s)
30" x 18" x 29.75" 30" x 18" x 28.75" 30" x 18" x 29.75" 30" x 18" x 28.75" 30" x 18" x 29.75"
Weight (lbs) 71 kg / 157 lbs 80 kg / 175 lbs 71 kg / 157 lbs 71 kg / 157 lbs 80 kg / 175 lbs
Bath Capacity (gal) 11.5 gal / 43.5 L 11.5 gal / 43.5 L 11.5 gal / 43.5 L 11.5 gal / 43.5 L 11.5 gal / 43.5 L
Bath Insulation
Thickness
1.5" 1.5" 1.5" 1.5" 1.5"
Inlet Water Pressure NA
Min 40 psi
Max 120 psi
NA
Min 40 psi
Max 120 psi
NA
Water Inlet & Outlet Fitting NA 9.52mm (3/8") NA 9.52mm (3/8") NA
Minimum Water Pipe Size NA 3/8" NA 3/8" NA
Approval
ETL Listed ETL Listed ETL Listed ETL Listed ETL Listed
*Rated at 20° F evaporator temperature and 90° F ambient temperature. †.3GPM, water is only used when the temperature of the condenser rises high enough to
open the cooling inlet valve. This is approximately 40% of the operating time depending on the ambient temperature and usage. Condenser Inlet Water Temperature:
Minimum 45° F / Maximum 80° F
To Next Page
Loading...
