Microchip Technology RN4870 - Page 23

 2016 Microchip Technology Inc. DS50002466A-page 23
2.4.22 SS,<hex8>
This command sets the default services to be supported by the RN4870 in GAP server
role. The input parameter is an 8-bit bitmap that indicates the services to be supported
as a server. Supporting service in server role means that the host MCU must supply
the values of all characteristics in supported services and to provide client access to
those values upon request. Once the service bitmap is modified, the device must
reboot to make the new services effective. The 8-bit bitmap is listed in Tabl e 2-6 . For
information on Bluetooth Services visit https://developer.bluetooth.org/gatt/ser-
vices/Pages/ServicesHome.aspx.
Support RN4020
MLDP streaming
service
0x0020 If set, the RN4870/71 supports RN4020 MLDP streaming
service. To start the MLDP streaming service, use command
I.
Default: 0000
Example: SR,A0 // Enable hardware flow control and Fast mode
Response: AOK
ERR
// Success
// Syntax error or invalid parameter
TABLE 2-5: BITMAP OF FEATURES (CONTINUED)
Feature Bitmap Description
Note: Issuing command SS removes all custom defined public or private
services. Use this command to enable default service before defining any
custom services.
TABLE 2-6: BITMAP OF SERVICES
Service Bitmap
Device Information 0x80
UART Transparent 0x40
Beacon 0x20
Airpatch 0x10
Default: 00
Example: SS,C0 // Support device info and UART Transparent
// services
Response: AOK
ERR
// Success
// Syntax error or invalid parameter