microHAM © 2010 All rights reserved
std. key Numeric Keypad
CW
mode
FSK
mode
Voice
mode
NUM LOCK
start/stop recording of message (recording mode is
indicated by NUM LED)
NUM *
Tune (can be canceled by keys NUM 0 or ESC, or by the
paddle)
ESC NUM 0
playback: stop transmitting (message or any characters in
buffer)
recording: abort recording without storing the message
F1-F9 NUM 1 – NUM 9
playback: start message playback
recording: set message number
NUM DEL
playback: periodically repeat last message (default interval
is 1 second, it can be changed by pressing the number on
number pad)
recording: no function
ALT
NUM /
Switch between "speed control mode" and "serial number
mode" (serial number mode is indicated by SCROLL LED,
if present)
When held allows setting the serial number
PG UP
UP
NUM +
WPM control Increase CW speed (step defined by configuration)
S/N mode Increment number by one without transmitting
PG DN
DN
NUM -
WPM control Decrease CW speed (step defined by configuration)
S/N mode Decrement number by one
HOME
ENTER
NUM ENTER
WPM control Reset CW speed to pot (knob) value
S/N mode
Transmit number with optional report and increase number
by one (format defined by configuration)
ENTER transmit CR and LF characters
F10 Toggle PTT – alternative to foot switch
CAPS LOCK
Switch between CW mode and FSK mode
(FSK mode is indicated by CAPS LED)
SPACE
transmit space (if "type ahead" mode is active all buffered
characters are transmitted before this space)
|
transmit gap (one-half dit delay time), this character cannot
be recorded to a message from keyboard – it may only be
entered from Router
0-9 a–z "#$%&'()*+,-./:;<=>?@\
transmit character, if "CW type ahead" mode is active
character is pushed to type ahead buffer to be transmitted
after next space. Note: some special characters are
mapped to standard prosigns (see WinKey manual)
0-9 A–Z !"$&='(),-./:;?
transmit character, if "FSK type ahead" mode is active
character is pushed to type ahead buffer to be transmitted
after next space
78
To Next Page
Loading...
Need help?
General