EasyManuals Logo

microHAM MK2R User Manual

microHAM MK2R
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
microHAM © 2010 All rights reserved
7 - HARDWARE SPECIFICATIONS
USB: USB 2.0 Full speed, USB 1.1 compatible
Power consumption:
USB – less than 300mA
Power supply – less than 300mA at 13.8V (max. 16V)
Radio Ports: 2 x RxD, TxD – max. 57,600 Baud, RTS/CTS handshake supported
Levels: TTL, inverted TTL, open collector bus, RS232
CW: 2 x open collector, max 30V/400mA
FSK: 2 x open collector, max 30V/400mA
PTT1: 2 x open collector, max 30V/400mA
PTT2: 2 x open collector, max 30V/400mA
PA PTT: selectable by internal jumpers
2 x Open collector, max. 45V/0.8A
2 x Relay contact, max. 125VAC/2A 60VDC/2A
LNA PTT: selectable by internal jumpers
2 x Open collector, max. 45V/0.8A
2 x Relay contact, max. 125VAC/2A 60VDC/2A
ACC port pins 2-13: TTL levels, max 4mA load
ACC port pin15: 5V, max. 100mA
LPT port: TTL levels, max 4mA load
Foot Switch: 2 x active when closed to ground, max load: 1 mA at 5V
PTT IN: 2 x active when closed to ground, max load: 1 mA at 5V
EXT SPEAKER: stereo, 32 ohm load
Audio Out: 600 Ohm, 3V p-p max.
3dB bandwidth: 0.2 - 6KHz typical
MK2R+ only
Second harmonic: -84 dB typical
Third harmonic: -72 dB typical
D/A Sampling rates:32000, 44100, 48000 Hz.
Audio In: 50K Ohm, max 4Vpp
3dB bandwidth: 0.2 - 6KHz typical
MK2R+ only
Absolute noise floor: -82 dBm @600 Ohms typical
Dynamic Range: 82 dB typical
A/D sampling rates: 8000, 11025, 16000, 22050, 32000, 44100, 48000 Hz.
Dimensions: W 305mm (12") x H 67mm (2.63") x D 106mm (4.17")
Weight: 1.5 kg (3.3 lbs.)
79

Other manuals for microHAM MK2R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the microHAM MK2R and is the answer not in the manual?

microHAM MK2R Specifications

General IconGeneral
BrandmicroHAM
ModelMK2R
CategoryRadio
LanguageEnglish