To Next PageTo Next Page
Need help?Do you have a question about the Microlab FC362 and is the answer not in the manual?
Explains safety symbols and precautions for product use.
Lists essential safety warnings for product operation.
Overview of the FC362 speaker system and its design.
Highlights the main attributes of the speaker system.
Lists all items included in the speaker system box.
Details controls and ports on the front panel.
Describes connections and features on the rear panel.
Identifies controls located on the top panel.
Guides on how to connect speakers, subwoofer, and playback devices.
Instructions on powering on and adjusting volume for optimal use.
Details electrical and performance data for amplifier and speakers.
Information on input/output ports and power supply requirements.
Solutions for when the system produces no audio output.
Addresses problems with one or more satellite speakers not working.
Solutions for static noise, distortion, and placement advice.
Lists compatible media playback devices for the system.
General| Type | 2.1 Speaker System |
|---|---|
| Frequency Response | 35 Hz - 20 kHz |
| Input Impedance | 10 kΩ |
| Subwoofer Power | 20W |
| Signal-to-Noise Ratio | 75dB |
| Speakers | 2 satellites, 1 subwoofer |
| Tweeter driver type | 2.5 inch |
| Interfaces | 3.5 mm stereo |
| Subwoofer Driver | 1 |
| Controls | Volume, Bass |
| Power Supply | AC 220V |
| Satellite Drivers | 2.5 inch tweeter |
