1
Table of contents
1. Introduction
1.1. Features
1.2. Important information about self-measurement
2. Important information on the subject of blood-pressure and its
measurement
2.1. How does high/low blood pressure arise?
2.2. Which values are normal?
2.3. What can be done, if regular high/low values are obtained?
2.4. MAM technology (Microlife Average Mode)
3. The various components of the blood-pressure monitor
4. Putting the blood-pressure monitor into operation
4.1. Inserting the batteries
4.2. Sleep mode of the device
4.3. Setting the time and date
4.4. Setting the user selection
5. Carrying out a measurement
5.1. Before the measurement
5.2. Common sources of error
5.3. Fitting the cuff
5.4. Measurement mode selection
5.5. Measuring procedure
5.6. Discontinuing a measurement
5.7. Memory – storage and recall of the measurements
5.8. Memory – cancellation of all measurements
6. PC-link functions
6.1. Installation and data transmission
6.2. Change user 1/user 2 memory during PC connection
7. Error messages/malfunctions
8. Care and maintenance, re-calibration
9. Guarantee
10. International Quality Standards
11. Technical specifications
12. www.microlife.com
To Next Page
Loading...
Need help?
General
