5) Press the TIME button again. The last
two characters (day) are now blinking
6) The corresponding day can now be
entered by pressing the MEMORY button.
(Example: 20 x presses)
7) Press the TIME button again. The display
now switches to the current time, during
which the first character (Hour) blinks
8) The corresponding hour can now be
entered by pressing the MEMORY button.
(Example: 9 x presses)
9) Press the TIME button again. The last
two characters (Minutes) now blink
10) The exact time can now be entered by
pressing the MEMORY button. (Example:
30 x presses)
11) After all settings have been made, press
the TIME button once again. The date is
briefly displayed and then the time. The
input is now confirmed and the clock
begins to run.
10
To Next Page
Loading...
Need help?
General
