☞ Further Information
With each press of the button (TIME, MEMORY) one input is made
(e.g. switching over from hours to minutes mode, or altering the value
by +1). However, if you keep the respective button depressed, you can
switch more quickly to the desired mode, or find the desired value
respectively.
4.4. User selection:
This advanced blood pressure monitor allows you
to track blood pressure readings for 2 individuals
independently.
a) Before measurement make sure you set
the unit for the intended user. The unit
can track results for 2 individuals. (User 1,
User 2)
b) The unit is set to User 1. Push and hold
the TIME button for 4 seconds to initiate
the user selection.
c) When the user icon is flashing, press the
MEMORY button to toggle between
users.
d) When the correct user is selected wait
three seconds for the user icon to stop
flashing. The monitor is now ready for
use.
e) Repeat the procedure again to change
users again.
To Next Page
Loading...
Need help?
General
