4.3. Setting the time and date
This blood pressure monitor incorporates an integrated clock with date
display. The advantage is the exact time each measurement is recorded.
After new batteries have been inserted, the clock begins to run from the
following setting: 2003-01-01 00:00 O’clock. You must then re-enter the
date and current time. For this, please proceed as follows (Example:
Entering 2004-06-20 Time 09:30 o’clock):
1) Press and hold the Time button for three
seconds. User 1 or 2 will begin flashing.
Press the Time button again briefly. Now
you can begin changing the time and
date.
2) The correct year can be entered by
pressing the MEMORY button.
(Example: 1 x press)
3) Press the TIME button again. The display
now switches to the current date, during
which the first character (month) blinks.
4) The corresponding month can now be
entered by pressing the MEMORY button.
Example: 6 x presses)
9
To Next Page
Loading...
Need help?
General
