Microlife CVS 271249 - Situations, Solutions, and Further Information; Other Possible Situations and Solutions; Further Information on Readings

14
☞ Further information
Repeating measurements without resting inbetween results in inaccurate read-
ings. Wait several minutes in a relaxed position, sitting or lying, before you
repeat a measurement.
6. Error messages/Trouble shooting
If an error occurs during a measurement, the
measurement is discontinued and a corresponding error
code is displayed (Example: Error No. 2).
Error No. Possible cause(s)
Err 1
No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.
Dec.(5) Time (8:15pm)
(8:16am)
Systolic
Diastolic Pulse
MR 02
( MR 01: Values of the last measurement) ( MR 02- MR 30: Values of the
(Alternating display)
measurements before MR 01)
DATE
MR
TIME A.M.
MR
MR
DATE
TIME
MR
Understanding memory readings