Rotary Microtome HM 340 E
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf 386 200 - English
If the button (fig. 6.9) is pressed, although the
automatic approach system is not installed or not
yet ready for work, the display (fig. 6.1) shows NO
APPROACH. Again press button (fig. 6.9) to
delete this information. Then continue working as
usual without automatic approach system.
CAUTION! Loosen the connecting cable on the
right side of the instrument, before removing knife
carrier or automatic approach system. For this, pull
off the grooved grip of the connector directly on
the housing to loosen the connecting lock.
To Next Page
Loading...