DOC 4380A
4380A O & M Manual
52
098-00723-000– Jul 2017 Revision 4.0 SyncSystem 4380A O&M Manual
[active] false
[occurrences] 0
[clock_starvation]
[active] false
[occurrences] 0
[clock_steer]
[active] false
[occurrences] 0
[clock_wander]
[active] false
[occurrences] 0
[fan]
[1]
[active] false
[occurrences] 0
[2]
[active] false
[occurrences] 0
[firmware_version_mismatch]
[active] false
[occurrences] 0
[gps_communication_error]
[active] false
[occurrences] 0
[gps_error]
[active] false
[occurrences] 0
[gps_invalid_fixed_position]
[active] false
[occurrences] 0
[gps_tracking]
[active] false
[occurrences] 0
[hp5071]
[electron_multiplier_voltage]
[active] false
[occurrences] 0
[locked]
[active] false
[occurrences] 0
[oscillator_control]
[active] false
[occurrences] 0
[signal_gain]
[active] false
[occurrences] 0
[leapseconds]
[internal_error]
[active] false
[occurrences] 0
[unknown]
[active] false
[occurrences] 0
[ocxo_freq_control]
[active] false
[occurrences] 0
Note: Any GPS Errors recorded when the unit first starts up may be reported, if so, they will always
have a date of 1 Jan 1998.
K. Each port [1-4] on each output module [1-6] should have zero active errors and the [outputs
disabled] and [outputs unlocked] active blocks should be false. The [power supply] [0-1] active
blocks should also be false.
[output_modules]
[1]
[active] false
[occurrences] 0
[ports]
[1]
[active] false
[occurrences] 0
[2]
[active] false
[occurrences] 0
[3]
[active] false
To Next Page
Loading...
