Need help?Do you have a question about the MicroStep Start Shaphon SH-HC31 and is the answer not in the manual?
General| Brand | MicroStep |
|---|---|
| Model | Start Shaphon SH-HC31 |
| Category | Industrial Equipment |
| Language | English |
Users must follow safety operation rules made by the country and the company.
Details risks from mechanical operation and high voltage, emphasizing caution and professional repair.
Instructions on power isolation, DC24V check, and proper grounding for plasma interference reduction.
Guidance on controller maintenance, repair by professionals, and warranty statement overview.
Lists technical parameters like processor, display, stroke, range, accuracy, speed, communication, power, and temperature.
Highlights SH-HC31 as an upgrade with integration, stepper motor, one-key calibration, and improved processor.
Provides installation dimensions and details for the plasma (arc voltage) mode.
Provides installation dimensions and details for the flame (capacitance) mode.
Details the purpose and connection instructions for each pin of the SH-HC31 controller.
Details wiring for plasma mode between SH-HC31 and CC-S3/CC-S3A.
Illustrates wiring for plasma mode with AHD1 voltage divider.
Shows wiring for plasma mode with AHD2 voltage divider.
Details wiring for plasma mode with AHD3 voltage divider and its settings.
Illustrates wiring for plasma mode with AHD4 voltage divider and DIP switch settings.
Details wiring for flame mode between SH-HC31 and CC-S3/CC-S3A.
Shows combined plasma/flame mode wiring with CNC controller.
Details the SH-HC31 control panel, including knobs, screen, and indicator lights.
Step-by-step guide for initial setup and operation in plasma and flame modes.
Explains the meaning of LED display codes (U, C, E, b, H, L, P, d) and indicator lights.
Describes error codes EE01 and EE02 and their resolution methods.
To Next Page