:MULTI:SPEED <disc>
Select the required measurement speed for
currently selected step.
Parameters:
MAX Maximum speed.
FAST Fast speed.
MED Medium speed.
SLOW Slow speed.
Example: :MULTI:SPEED SLOW
will select slow speed for currently
selected step.
Response:
None.
:MULTI:SPEED?
Returns the test speed of currently selected
step.
Parameters:
None.
Response:
Returns the test speed as an integer
according to the table:
0 Maximum
1 Fast
2 Medium
3 Slow
Example: 1
indicates that Fast measurements are
selected.
:MULTI:HIgh-LIMit <real>
Set the higher test limit of the currently
selected step.
Parameters:
The required higher limit.
example: :MULTI:HI-LIM
10.0
will set a high limit to 10.
Response:
None.
:MULTI:HIgh-LIMit?
Returns the high limit value of the
currently selected step.
Parameters:
None.
Response:
The high limit value in engineering
format.
Example: +.50000000E+01
indicates a high limit to5.
To Next Page
Loading...
