EasyManuals Logo

Midas SIENA User Manual

Midas SIENA
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
input / output
input
2
3
4
5
1
auto
mute
masters
talk mic
1-2
5-6
7-8
3-4
5-1
61
3-1
1
4
121-1
9-1
0
masters
talk gain
talk
ext
on
talk
60
15
NEUTRIK
12
3
Talkback
The Siena provides talkback which may be routed to any of the
console's 16 mix bus and stereo master outputs. There are two
options for connecting talkback sources to the console:
On the front panel, a conveniently located internal talk mic
socket, supplied with 48V phantom power, allows connection of a condenser microphone.
On the rear panel of the master section, the XLR allows connection of an external talkback source.
Each of these circuits is individually routed to the talk bus, and combined with the tone generator if it is enabled.
The combined talkback and tone signals may then be routed to any of the console's 16 mix bus and stereo master
outputs using the 'talk to mix' and 'talk to masters' switches shown below.
Note: to route only talkback to a mix bus output or stereo master, without the tone generator, make sure that the
switch is disabled.
In addition to routing talkback to the console's mix bus and master outputs, the circuit available on the
rear panel of the master section, provides an output of the talk bus enabling the combined talkback and tone
signals to be output to an external communications system.
talk in
Generator On
talk out
Master Section: Stereo Master & Monitoring ControlsMaster Section: Stereo Master & Monitoring Controls
Operators Manual - Page 21
Talk Mic The internal talk mic socket is
a conventionally wired XLR male and is
supplied with 48V phantom power
allowing the connection of condenser
microphones for engineer talkback.
Talk Mic Gain The gain of the internal
talk mic input is continuously variable
from +15dB to +60dB.
Talk On When depressed, the internal
talk mic input is enabled and routed to
the talk bus. In addition, all local monitor
outputs are attenuated by 20dB to help
prevent feedback.
Talk to Mix Bus Outputs (1-2, 3-4,
etc.) The 16 talk to mix switches route
the combined talkback and tone
generator signals individually to each of
the console's 16 mix busses.
Talk to Masters mastersThe switch
routes the combined talkback and tone
generator signals to the console's stereo
master.
Talk External talk ext
talk in talk out
talk in
talk out
The switch
enables both the and
connections on the rear panel of the
master section. This adds the external
talkback source connected to the
XLR to the talk bus. It also activates the
connection providing an output
feed from the talk bus.
10
10
5
5
0
20
15
30
40
left
right
stereo
talk mic
left
left
right
right
master meters
solo meters
generator
frequency
10
15
20
10
5
0
5
30
40
mono sum
direct input
direct to
masters
local
5
auto mute
5
1-2
5-6
7-8
3-4
5-1
61
3-1
1
4
121-1
9-1
0
phones
masters
add
clear
monitor
input output
talk gain
input / output
input
talk
ext
on
talk
2
3
4
5
1
auto
mute
masters
S0011
masters
mono
0
0
0
50
50
1
5k
500
0
21
18
15
12
9
3
6
3
9
15
18
21
24
12
6
0
21
18
15
12
9
3
6
3
9
15
18
21
24
12
6
0
21
18
15
12
9
3
6
3
9
15
18
21
24
12
6
0
21
18
15
12
9
3
6
3
9
15
18
21
24
12
6
0
20
6
10
10
60
15
NEUTRIK
12
3
MUTE MUTE MUTE
SOLO
SOLO SOLO MUTE
MUTE
SOLO
SOLO
PFL PFL
MUTE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midas SIENA and is the answer not in the manual?

Midas SIENA Specifications

General IconGeneral
BrandMidas
ModelSIENA
CategoryMusic Mixer
LanguageEnglish

Related product manuals