▲
Notes
1. To defrost big portions of food, it is possible to remove the side-racks
and place the container on the cavity floor.
2. To warming tableware, it is beneficial to remove the side-racks and the
heating modes “Hot Air Grilling” and “Fan Heating” with temperature
setting of 50°C are useful. “Hot Air Grilling” should be used, if more
than half of the cavity floor is covered by the tableware.
3. Due to an optimum evenness of heat distribution inside the cavity
during “Fan Heating”, the fan will work at certain times of the heating
process, to guaranty the best possible performance.
▲
Caution
1. If you open the appliance door during an on-going operation, the
operation will not be paused. Please be especially careful with the
risk of burns.
2. Do not cover the ventilation slots. Otherwise, the appliance may
overhea.To make the appliance cools down more quickly after the
operation, the cooling fan may continue to run for a period
afterwards.
Lighting
When you switch the appliance on to any mode, the lamp will be always
on until the operation has finished. You can use the main mode: “Lamp”
during different operations, i.e. cleaning, preparing the cooking process,
pause heating modes during opening the door.
Cooling fan
The cooling fan switches on and off as required. The hot air escapes
above the door.
To Next Page
Loading...
